Selection Guide

	RECOMMENDED CONFIGURATION
Type of Measurement / Application	Meter	Software	Probe
Pressure	All
Velocity	All		Pitot-Static
Monitor meter readings with a computer	All	FlowScan Suite or SwiftScan depending on meter
Velocity with automatic density correction	FKT 3DP1A FKT 2DP1A-C FKT 1DP1A-SV		Pitot-Static
Quickly determine duct flow rates	All		RAP
Quickly determine average duct flow velocity	All		RAP
Multiple pressures	FKT 3DP1A FKT 2DP1A-C
Multiple velocities	FKT 3DP1A FKT 2DP1A-C		Pitot-Static
Velocity in high-speed flows	FKT 2DP1A-C		Small Pitot-Static
Velocity of flows constantly changing direction or with high turbulence	All		Kiel
Mass or volumetric flow rate	FKS 1DP-PBM FKT 1DP1A-SV		Pitot-static RAP
Field Calibration	FKT 3DP1A FKT 2DP1A-C FKT 1DP1A-SV
Stand-alone data Logging & surveying without a computer	FKS 1DP-PBM	SwiftLink included with meter
Wind tunnel velocity and pressure	FKT 3DP1A FKT 2DP1A-C FKS 1DP-PBM		Pitot-Static
Velocity and flow in dirty airflows such as stack testing	All		S-Type with Filter Kit
Velocity in ducts with constrained access	All		S-Type RAP
Density, Temp or Relative Humidity	FKT 3DP1A FKT2DP1A FKT 1DP1A-SV
Humidity Ratio	FKT 1DP1A-SV
Perform flow surveys with a computer	FKT 3DP1A FKT2DP1A FKT 1DP1A-SV	FlowScan Suite	Pitot-Static S-Type